DUAL H-BRIDGE MODULE
$420.99
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Description
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Voltage range: 6V – 28V (12V and 24V automotive installations)
Output current: 10A continuous, 30A peak
4 analogue (0-5V) / digital (35Hz – 200Hz PWM) inputs
Output PWM: 12bit 3.9kHz
The CAN H-Bridge device can be used to supply protected low side (GND) or high side (VBat) supply independently to each of 4 outputs for bidirectional DC motor control. Low side outputs can be PWM modulated on per-bridge basis.
Common use cases are:
Power windows
High current electronic throttle body amplifier
The dual H-Bridge device must be programmed using a CAN interface. The ECUMaster USB to CAN, Kvaser, or Peak PCAN may be used.
What’s in the box?
Can H-Bridge Module
24 Position connector with terminals
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.